Metal Roofing

Our metal roofing nails are used for fastening metal roofing and siding as well as aluminum and fiberglass products. EPDM rubber washers seal nail holes. Nails are available painted different colors (minimums apply). Most manufacturers recommend minimum nail pepetration of 1" into purlin or girt.


Hot-Dip Galvanized "Fat-Head"® Gray Silicone Washer Nails
Hot-Dip Galvanized

Hand Drive
STORMGUARD® Double Hot-Dip Galvanized - ASTM A153 Compliant
Ring Shank
Made in the USA
Series ID: R16*FH

These gray silicone washers are twice as thick as our black EPDM washers. The extra resiliency allows them to seal the nail hole even if not driven at right angles to the sheet. Do not overdrive! Washer should just begin to "balloon" under the nail head, but not bulge over nail head. Most Metal Roofing manufacturers recommend minimum nail penetration of at least 1" into purlin. Nails are double-dipped in molten zinc.


More Info


Hot-Dip Galvanized Flat Rubber Washer Nails
Hot-Dip Galvanized Flat Rubber Washer Nails for Metal Roofing

Hand Drive
STORMGUARD® Double Hot-Dip Galvanized - ASTM A153 Compliant
Ring Shank
Made in the USA
Series ID: R16*AF

Widely used for fastening corrugated metal roofing and siding. Also popular for aluminum and fiberglass products. Nails are double dipped in molten zinc after threading so no raw steel is exposed. EPDM rubber washers seal nail holes. Ring shanks hold tight. Available from stock in many popular colors for an additional charge. Call for availability. Non-stocked colors require a minimum order of 200 lbs. per size and color and 100 lb. increments beyond. Most manufacturers recommend minimum nail penetration of 1" into purlin or girt.


More Info