Copper Plain Shank Slating & Flashing Nails
Copper Plain Shank Slating & Flashing Nails
Hand Drive
Copper
Plain Shank
Made in the USA
Series ID: CU*
These solid copper nails are the type recommended for use with many major brands of tile and slate roofing – and are the most compatible nails for use with copper flashing.The full 3/8” head gives good bearing pressure on roofing and flashing material. Diamond point and smooth shank make driving easy.
| Stock Number | Length | Gauge | Head | Nails/Lb | 25 Lb | 5 Lb |
|---|---|---|---|---|---|---|
| CU075 Spec Sheet | 3/4" | .135" | .375" | 250.0 | ---- | $91.58 |
| CU100 Spec Sheet | 1" | .135" | .375" | 194.0 | ---- | $82.41 |
| CU125 Spec Sheet | 1-1/4" | .135" | .375" | 158.0 | $417.91 | $82.10 |
| CU150 Spec Sheet | 1-1/2" | .135" | .375" | 133.0 | $404.60 | $81.66 |
| CU175 Spec Sheet | 1-3/4" | .135" | .375" | 115.0 | $412.53 | $81.03 |
| CU200 Spec Sheet | 2" | .135" | .375" | 102.0 | $409.36 | $80.40 |
| CU250 Spec Sheet | 2-1/2" | .135" | .375" | 83.0 | $406.83 | $79.89 |
| CU300 Spec Sheet | 3" | .135" | .375" | 70.0 | $404.93 | $79.51 |
NOTE: 5 Lb boxes are packed 6 per carton. A "broken carton" premium of $10.00 applies per Stock Number
Please note that our copper nails ranging from 1" up to 2" were previously made out of 11 gauge wire. Due to bending concerns, we have decided to manufacture all copper nail lengths out of 10 gauge wire. During the brief transition period, it is possible that you could receive either 10 gauge or 11 gauge nails. We apologize for the inconvenience; please contact the Maze Nails sales department at 800-435-5949 for more information.