Roof Flashing

Our roof flashing nails are the same nails used for asphalt shingles. Large heads give good bearing pressure. It is recommended that you "match materials" - use a nail made from the same material as your flashing.


Aluminum Siding Nails
Aluminum Siding Nails for Roof Flashing

Hand Drive
High-Tensile Aluminum Alloy
Plain Shank
Made in the USA
Series ID: AS*

DRIVE-RITE® aluminum nails for applying vinyl siding have large 3/8" flat heads and diamond points. These nails are made by our Independent Nail Division - which specializes in a wide variety of aluminum (Bullseye®) and non-ferrous nails. Shipped only in 1-lb. boxes, 25 per master.


More Info


Copper Plain Shank Slating & Flashing Nails
Copper Plain Shank Slating & Flashing Nails for Roof Flashing

Hand Drive
Copper
Plain Shank
Made in the USA
Series ID: CU*

These solid copper nails are the type recommended for use with many major brands of tile and slate roofing – and are the most compatible nails for use with copper flashing.The full 3/8” head gives good bearing pressure on roofing and flashing material. Diamond point and smooth shank make driving easy.


More Info


Copper Ring Shank Slating & Flashing Nails
Copper Ring Shank Slating & Flashing Nails for Roof Flashing

Hand Drive
Copper
Ring Shank
Made in the USA
Series ID: CURA*

These solid copper nails are the type recommended for use with many major brands of tile and slate roofing – and are the most compatible nails for use with copper flashing.The full 3/8” head gives good bearing pressure on roofing and flashing material. Diamond point makes driving easy. Ring shank holds tight.


More Info


Hot-Dip Galvanized Plain Shank Asphalt & Fiberglass Shingle Nails
Hot-Dip Galvanized Plain Shank Asphalt & Fiberglass Shingle Nails for Roof Flashing

Hand Drive
STORMGUARD® Double Hot-Dip Galvanized - ASTM A153 Compliant
Plain Shank
Made in the USA
Series ID: R10*

Designed for the secure application of asphalt and fiberglass shingles on new construction and re-roofing jobs. STORMGUARD® Double Hot-Dipped Zinc-Coating provides extra corrosion-resistance in sea coastal areas. Manufactured to meet federal spec. FFN-105-B and ASTM spec. A-153 for hot-dip zinc coating. Nails should be long enough to penetrate 3/4" into the wood deck lumber, or completely through plywood decking. All Maze Nails are 100% Made in the U.S.A. SIZES AND QUANTITIES COMMONLY USED On A New Roof – 1-1/4" - 320 nails per sq. or 1-3/4 lbs. Over An Old Roof – 1-3/4" - 320 nails per sq. or 2-1/4 lbs.


More Info


Hot-Dip Galvanized Ring Shank Asphalt & Fiberglass Shingle Nails
Hot-Dip Galvanized Ring Shank Asphalt & Fiberglass Shingle Nails for Roof Flashing

Hand Drive
STORMGUARD® Double Hot-Dip Galvanized - ASTM A153 Compliant
Ring Shank
Made in the USA
Series ID: R10*A

Designed for the secure application of asphalt and fiberglass shingles on new construction and re-roofing jobs. Ring shank provides extra holding power, especially in high wind/hurricane areas. STORMGUARD® Double Hot-Dipped Zinc-Coating provides extra corrosion-resistance in sea coastal areas. Type 304 Stainless Steel Roofing Nails also available. Manufactured to meet federal spec. FFN-105-B and ASTM spec. A-153 for hot-dip zinc coating. Nails should be long enough to penetrate 3/4" into the wood deck lumber, or completely through plywood decking. All Maze Nails are 100% Made in the U.S.A. SIZES AND QUANTITIES COMMONLY USED On A New Roof – 1-1/4" - 320 nails per sq. or 1-3/4 lbs. Over An Old Roof – 1-3/4" - 320 nails per sq. or 2-1/4 lbs.


More Info


Hot-Dip Galvanized Spiral Shank Asphalt & Fiberglass Shingle Nails
Hot-Dip Galvanized Spiral Shank Asphalt & Fiberglass Shingle Nails for Roof Flashing

Hand Drive
STORMGUARD® Double Hot-Dip Galvanized - ASTM A153 Compliant
Spiral Shank
Made in the USA
Series ID: R10*S

Designed for the secure application of asphalt and fiberglass shingles on new construction and re-roofing jobs. Spiral shank provides extra holding power, especially in high wind/hurricane areas. STORMGUARD® Double Hot-Dipped Zinc-Coating provides extra corrosion-resistance in sea coastal areas. Type 304 Stainless Steel Roofing Nails also available. Manufactured to meet federal spec. FFN-105-B and ASTM spec. A-153 for hot-dip zinc coating. Nails should be long enough to penetrate 3/4" into the wood deck lumber, or completely through plywood decking. All Maze Nails are 100% Made in the U.S.A. SIZES AND QUANTITIES COMMONLY USED On A New Roof – 1-1/4" - 320 nails per sq. or 1-3/4 lbs. Over An Old Roof – 1-3/4" - 320 nails per sq. or 2-1/4 lbs.


More Info


Stainless Steel (204) Ring Shank Roofing Nails
Stainless Steel (204) Ring Shank Roofing Nails for Roof Flashing

Hand Drive
Stainless Steel Type 204Cu
Ring Shank
Made in the USA
Series ID: CSSRFG*A

These nails are made from highly corrision-resistant Type 204Cu Stainless Steel for outstanding rust-protection. The strong shanks drive with great strength and the ring shanks ensure excellent holding power.


More Info


Stainless Steel (304) Plain Shank Roofing Nails
Stainless Steel (304) Plain Shank Roofing Nails for Roof Flashing

Hand Drive
Stainless Steel Type 304
Plain Shank
Made in the USA
Series ID: SSRFG*

These nails are made from highly corrosion-resistant Type 304 Stainless Steel for outstanding rust-protection. The strong steel shanks drive with great strength.


More Info


Stainless Steel (304) Ring Shank Roofing Nails
Stainless Steel (304) Ring Shank Roofing Nails for Roof Flashing

Hand Drive
Stainless Steel Type 304
Ring Shank
Made in the USA
Series ID: SSRFG*A

These nails are made from highly corrosion-resistant Type 304 Stainless Steel for outstanding rust-protection. The strong steel shanks drive with great strength. Ring shank provides additional holding power.


More Info