PVC/Composite Decking

These nails provide a cost-efficient alternative to screws when installing decking.


20° Stainless Steel (304) Ring Shank Siding Nails
20° Stainless Steel (304) Ring Shank Siding Nails for PVC/Composite Decking
20° Stainless Steel (304) Ring Shank Siding Nails for PVC/Composite Decking

20° Stick Collation
Stainless Steel Type 304
Ring Shank
Made in the USA
Series ID: CXSS*

Popular for cedar, redwood, and fiber cement sidings. The ring shanks hold tighter than smooth nails, and the textured head holds paint and stain. Made from Type 304 Stainless Steel. Use Type 316 Stainless Steel Fasteners for the highest degree of corrosion-resistance in environments such as sea-coastal areas.


More Info


20° Stainless Steel (316) Ring Shank Siding Nails
20° Stainless Steel (316) Ring Shank Siding Nails for PVC/Composite Decking
20° Stainless Steel (316) Ring Shank Siding Nails for PVC/Composite Decking

20° Stick Collation
Stainless Steel Type 316
Ring Shank
Made in the USA
Series ID: CXSS*316

Popular for cedar, redwood, and fiber cement sidings. The ring shanks hold tighter than smooth nails, and the textured head holds paint and stain. Type 316 Stainless Steel Nails provide the highest degree of corrosion resistance - especially in sea-coastal areas.


More Info


Hot-Dip Galvanized Phillips Head Decking Screw
Hot-Dip Galvanized Phillips Head Decking Screw for PVC/Composite Decking

#2 Phillips Head
#8 Screw
Made in the USA
Series ID: DZ*

These case-hardened screws are hot-dipped in molten zinc to meet the specifications of producers of wood treatment chemicals. Excellent for a wide variety of outdoor uses such as decks, boat docks, steps, patios, furniture, fences, flower boxes, or any project where long-term corrosion-resistance and exceptional holding power are required. #2 Phillips head screw.


More Info


Hot-Dip Galvanized Spiral Shank P.T.L. Nails
Hot-Dip Galvanized Spiral Shank P.T.L. Nails for PVC/Composite Decking

Hand Drive
STORMGUARD® Double Hot-Dip Galvanized - ASTM A153 Compliant
Spiral Shank
Made in the USA
Series ID: T44*S

These nails are made from stiffer stock steel so the shanks can be smaller in diameter to help reduce wood splitting without bending. Spiral shanks provide exceptional holding power. Producers of treated lumber and many building codes specify hot-dip galvanized or stainless steel nails because they have a rust-free life expectancy comparable to that of the treated lumber. Maze STORMGUARD® “P.T.L.”® Nails are double dipped in molten zinc. Shipped in Standard 50-lb. or 25-lb. Bulk Cartons Unless Otherwise Specified. (6) 5-lb. boxes per master. (25) 1-lb. boxes per master.


More Info


Spiral Shank P.T.L. Nails
Spiral Shank P.T.L. Nails for PVC/Composite Decking
Spiral Shank P.T.L. Nails for PVC/Composite Decking

20° Stick Collation
STORMGUARD® Double Hot-Dip Galvanized - ASTM A153 Compliant
Spiral Shank
Made in the USA
Series ID: CT44*S

Heavy Duty Decking ("Trex") Nail The heavier gauge on these nails make them ideal for the new popular composite decking such as Trex®, Boardwalk®, ChoiceDek®, WeatherBest®, Nexwood®, etc. The manufacturers of these deck products recommend and specify hot-dip galvanized or stainless steel fasteners.


More Info