Masonry

Our masonry nails are hardened for added strength and can be used for metal lath, furring strips, floor plates, partition walls etc.


Hardened Cut Masonry Nails
Hardened Cut Masonry Nails for Masonry

Hand Drive
Brite
Hardened
Cut Nail
Made in the USA
Series ID: CMH*

These Hardened Steel Cut Masonry nails, manufactured by Tremont Nail Co. of Wareham, Mass. (est. 1819), are ideal for attaching wood members to cinder block walls as well as to fresh concrete. The blunt point and tapered shank cause minimal spalling during penetration and offer even greater pull-out resistance than wire masonry nails. 3/4" penetration is recommended for satisfactory holding power. Also recommended for face-nailing hardwood flooring. Use safety glasses when driving any hardened nails.


More Info


Hardened Fluted Masonry Nails
Hardened Fluted Masonry Nails for Masonry

Hand Drive
Brite
Hardened
Fluted Shank
Made in the USA
Series ID: H*S

Designed for fastening furring strips, floor plates, partition walls to “green” (uncured) concrete. Hardened steel. For best results drive nails 3" or more from edge of masonry or block allowing 3/4" penetration. Safety glasses recommended when driving hardened nails. For shorter sizes, see Hardened Metal Lath Nails.


More Info


Hardened Metal Lath Nails
Hardened Metal Lath Nails for Masonry

Hand Drive
Brite
Hardened
Plain Shank
Made in the USA
Series ID: HML*

These Hardened Metal Lath nails are ideal for attaching metal lath to masonry surfaces. The head is larger than standard masonry nails to ensure that the lath doesn’t pull through. The strong shanks drive well without bending.


More Info


Hot-Dip Galvanized Hardened Cut Masonry Nails
Hot-Dip Galvanized Hardened Cut Masonry Nails for Masonry

Hand Drive
STORMGUARD® Double Hot-Dip Galvanized - ASTM A153 Compliant
Hardened
Cut Nail
Made in the USA
Series ID: CMH*Z

These nails are designed to attach treated wood sill plates to newly poured concrete. Please note: True hot-dip galvanizing reduces the temper of hardened square cut nails, so it is important that the nails are applied to "green" uncured concrete. Hot-dip galvanized to specification ASTM A-153 to comply with building code requirements. For best results, a drilling hammer is recommended.


More Info


Hot-Dip Galvanized Hardened Masonry Nails
Hot-Dip Galvanized Hardened Masonry Nails for Masonry

Hand Drive
STORMGUARD® Double Hot-Dip Galvanized - ASTM A153 Compliant
Hardened
Fluted Shank
Made in the USA
Series ID: XH*SZ

These STORMGUARD® double hot-dip galvanized, hardened masonry nails are recommended for attaching downspout gutter straps firmly to the house. Hot-dipping ensures excellent corrosion-resistence


More Info


Pan Nails
Pan Nails for Masonry

Hand Drive
Brite
Ring Shank
Made in the USA
Series ID: X*148A

Ideal for securing metal pans in place for poured concrete structures. Ring Shanks hold tight. Large head ensures reliable hold.


More Info