Our asphalt shingle nails have a large head and are available in a variety of finishes. Designed to meet ASTM spec F1667 and A-153. Available collated as well. Nails should be long enough to penetrate at least 3/4" into the wood deck lumber.
Hot-Dip Galvanized Spiral Shank Asphalt & Fiberglass Shingle Nails
STORMGUARD® Double Hot-Dip Galvanized - ASTM A153 Compliant
Made in the USA
Series ID: R10*S
Designed for the secure application of asphalt and fiberglass shingles on new construction and re-roofing jobs. Spiral shank provides extra holding power, especially in high wind/hurricane areas. STORMGUARD® Double Hot-Dipped Zinc-Coating provides extra corrosion-resistance in sea coastal areas. Type 304 Stainless Steel Roofing Nails also available. Manufactured to meet federal spec. FFN-105-B and ASTM spec. A-153 for hot-dip zinc coating. Nails should be long enough to penetrate 3/4" into the wood deck lumber, or completely through plywood decking. All Maze Nails are 100% Made in the U.S.A. SIZES AND QUANTITIES COMMONLY USED On A New Roof – 1-1/4" - 320 nails per sq. or 1-3/4 lbs. Over An Old Roof – 1-3/4" - 320 nails per sq. or 2-1/4 lbs.
|Stock Number||Length||Gauge||Head||Nails/Lb||50 Lb|